Innerbanner

Products

TLB-250 oC

TLB-250 oC

The TB 250 are low-cost, portable, self-contained Dry Block Calibrators for all types of temperature probes and gauges within the range from ambient to 250 oC.

  • They are designed with a unique thermos-well structure, optimized for thermal gradient of the calibration well. This unique design ensures uniform heating without loss of accuracy.
  • Accuracy± 0.3 % FS
    ± 0.8 oC
  • Stability± 0.2 oC
  • Well-ToWell Uniformity ± 0.1 oC
  • Full Heating Time/Settling Time 30 to 40 minutes from ambient to 250 oC Settling Time 20 Minute
  • Cooling Time 30 to 40 minutes from 250 oC to 100 oC
  • Power230 VAC(± 5 %) 50/60 Hz 600 W
  • Mechanical Dimension (In mm)
    (L*H*W)     320*320*145
  • Dry Well Insert Size 4.5/6.5/8.5/10.5/ 12.5/19
    In mm Length (Depth) 110 mm
  • Weight 8.5 kg
  • Resolution 0.1 oC
  • Traceability National Standard
liquid temperature bath

The temperature of isothermal block is displayed on the Digital Display of the PID Controller. The desired temperature can be set with in the range with a reliability of 0.1 °C using Keypad on the Controller. With factory set P, I and D Parameters, the Dry Block Calibrators achieve and maintain the set temperature with a stability of ± 0.2 oC.

TB-400

TB-400

The TB 400 are low-cost, portable, self-contained Dry Block Calibrators for all types of temperature probes and gauges within the range from ambient to 400 oC.

  • They are designed with a unique thermos-well structure, optimized for thermal gradient of the calibration well. This unique design ensures uniform heating without loss of accuracy.
  • Accuracy± 0.3 % FS
    ± 1.2 oC
  • Stability± 0.2 oC
  • Well-ToWell Uniformity ± 0.1 oC
  • Full Heating Time/Settling Time 30 to 40 minutes from ambient to 400 oC Settling Time 20 Minute
  • Cooling Time 30 to 40 minutes from 400 oC to 100 oC
  • Power230 VAC(± 5 %) 50/60 Hz 600 W
  • Mechanical Dimension (In mm)
    (L*H*W)     260*320*145
  • Dry Well Insert Size 4.5/6.5/8.5/10.5/ 12.5/19
    In mm Length (Depth) 110 mm
  • Weight 5 kg
  • Resolution 0.1 oC
  • Traceability National Standard
dry block temperature bath

A set of three inserts is supplied with each calibrator to accommodate probes of standard sizes. In addition, one general purpose insert is also provided for nonstandard probes. The insert selected for the probe under test can placed in the thermal block of the calibrator which is designed to maintain the probes at the same temperature. A PID Controller supplied as part of the instrument control the temperature of the Master Probe. The temperature of the unknown probes is same as the master probe because of the isothermal design.

The temperature of isothermal block is displayed on the Digital Display of the PID Controller. The desired temperature can be set with in the range with a reliability of 0.1 0C using Keypad on the Controller. With factory set P, I and D Parameters, the Dry Block Calibrators achieve and maintain the set temperature with a stability of ± 0.2 0C.

Accessories Supplied

  • Insert No 1: Four holes of 6.5mm, 4.2mm, 8.2mm, 10.2 mm diameter
  • Insert No 2:Three holes of 6.5mm, 6.5mm, 12.7 mm diameter
  • Insert No 3: Two holes of 6.5mm, 19 mm diameter
  • Insert No 4: One hollow insert with 28mm diameter for multiple or signed odd size probe.
  • Magnesium Oxide: A bottle of MgO is supplies for filling gapes around sensor.

TB-400 (Baby Bath)

TB-400 (Baby Bath)

The TB 400 are low-cost, portable, self-contained Dry Block Calibrators for all types of temperature probes and gauges within the range from ambient to 400 oC.

  • They are designed with a unique thermos-well structure, optimized for thermal gradient of the calibration well. This unique design ensures uniform heating without loss of accuracy.
  • Accuracy± 0.3 % FS
    ± 1.2 oC
  • Stability± 0.2 oC
  • Well-ToWell Uniformity ± 0.1 oC
  • Full Heating Time/Settling Time 30 to 40 minutes from ambient to 400 oC Settling Time 20 Minute
  • Cooling Time 30 to 40 minutes from 400 oC to 100 oC
  • Power230 VAC(± 5 %) 50/60 Hz 600 W
  • Mechanical Dimension (In mm)
    (L*H*W)     300*320*145
  • Dry Well Insert Size 4.5/6.5/8.5/10.5/ 12.5/19
    In mm Length (Depth) 110 mm
  • Weight 7 kg
  • Resolution 0.1 oC
  • Traceability National Standard
dry block temperature bath

A set of three inserts is supplied with each calibrator to accommodate probes of standard sizes. In addition, one general purpose insert is also provided for nonstandard probes. The insert selected for the probe under test can placed in the thermal block of the calibrator which is designed to maintain the probes at the same temperature. A PID Controller supplied as part of the instrument control the temperature of the Master Probe. The temperature of the unknown probes is same as the master probe because of the isothermal design.

The temperature of isothermal block is displayed on the Digital Display of the PID Controller. The desired temperature can be set with in the range with a reliability of 0.1 0C using Keypad on the Controller. With factory set P, I and D Parameters, the Dry Block Calibrators achieve and maintain the set temperature with a stability of ± 0.2 0C.

Accessories Supplied

  • Insert No 1: Four holes of 6.5mm, 4.2mm, 8.2mm, 10.2 mm diameter
  • Insert No 2:Three holes of 6.5mm, 6.5mm, 12.7 mm diameter
  • Insert No 3: Two holes of 6.5mm, 19 mm diameter
  • Insert No 4: One hollow insert with 28mm diameter for multiple or signed odd size probe.
  • Magnesium Oxide: A bottle of MgO is supplies for filling gapes around sensor.

TB-500

TB-500

The TB 500 are low-cost, portable, self-contained Dry Block Calibrators for all types of temperature probes and gauges within the range from ambient to 500 oC.

  • They are designed with a unique thermos-well structure, optimized for thermal gradient of the calibration well. This unique design ensures uniform heating without loss of accuracy.
  • Accuracy± 0.3 % FS
    ± 1.5 oC
  • Stability± 0.2 oC
  • Well-ToWell Uniformity ± 0.1 oC
  • Full Heating Time/Settling Time 30 to 40 minutes from ambient to 500 oC Settling Time 20 Minute
  • Cooling Time 30 to 40 minutes from 500 oC to 100 oC
  • Power230 VAC(± 5 %) 50/60 Hz 800 W
  • Mechanical Dimension (In mm)
    (L*H*W)     300*320*145
  • Dry Well Insert Size 4.5/6.5/8.5/10.5/ 12.5/19
    In mm Length (Depth) 110 mm
  • Weight 7 kg
  • Resolution 0.1 oC
  • Traceability National Standard
dry block temperature bath

A set of three inserts is supplied with each calibrator to accommodate probes of standard sizes. In addition, one general purpose insert is also provided for nonstandard probes. The insert selected for the probe under test can placed in the thermal block of the calibrator which is designed to maintain the probes at the same temperature. A PID Controller supplied as part of the instrument control the temperature of the Master Probe. The temperature of the unknown probes is same as the master probe because of the isothermal design.

The temperature of isothermal block is displayed on the Digital Display of the PID Controller. The desired temperature can be set with in the range with a reliability of 0.1 0C using Keypad on the Controller. With factory set P, I and D Parameters, the Dry Block Calibrators achieve and maintain the set temperature with a stability of ± 0.2 0C.

Accessories Supplied

  • Insert No 1: Four holes of 6.5mm, 4.2mm, 8.2mm, 10.2 mm diameter
  • Insert No 2:Three holes of 6.5mm, 6.5mm, 12.7 mm diameter
  • Insert No 3: Two holes of 6.5mm, 19 mm diameter
  • Insert No 4: One hollow insert with 28mm diameter for multiple or signed odd size probe.
  • Magnesium Oxide: A bottle of MgO is supplies for filling gapes around sensor.

TB-600

TB-600

The TB 600 are low-cost, portable, self-contained Dry Block Calibrators for all types of temperature probes and gauges within the range from ambient to 600 oC.

  • They are designed with a unique thermos-well structure, optimized for thermal gradient of the calibration well. This unique design ensures uniform heating without loss of accuracy.
  • Accuracy± 0.3 % FS
    + 1 Digit
    ± 2.8 oC
  • Stability± 1 oC
  • Well-ToWell Uniformity ± 1 oC
  • Full Heating Time/Settling Time 30 to 40 minutes from ambient to 600 oC Settling Time 20 Minute
  • Cooling Time 30 to 40 minutes from 600 oC to 100 oC
  • Power230 VAC(± 5 %) 50/60 Hz 800 W
  • Mechanical Dimension (In mm)
    (L*H*W)     300*320*145
  • Dry Well Insert Size -
  • Weight 7.5 kg
  • Resolution 1 oC
  • Traceability National Standard
dry block temperature bath

A set of three inserts is supplied with each calibrator to accommodate probes of standard sizes. In addition, one general purpose insert is also provided for nonstandard probes. The insert selected for the probe under test can placed in the thermal block of the calibrator which is designed to maintain the probes at the same temperature. A PID Controller supplied as part of the instrument control the temperature of the Master Probe. The temperature of the unknown probes is same as the master probe because of the isothermal design.

The temperature of isothermal block is displayed on the Digital Display of the PID Controller. The desired temperature can be set with in the range with a reliability of 0.1 0C using Keypad on the Controller. With factory set P, I and D Parameters, the Dry Block Calibrators achieve and maintain the set temperature with a stability of ± 0.2 0C.

Accessories Supplied

  • Insert No 1: Four holes of 6.5mm, 4.2mm, 8.2mm, 10.2 mm diameter
  • Insert No 2:Three holes of 6.5mm, 6.5mm, 12.7 mm diameter
  • Insert No 3: Two holes of 6.5mm, 19 mm diameter
  • Insert No 4: One hollow insert with 28mm diameter for multiple or signed odd size probe.
  • Magnesium Oxide: A bottle of MgO is supplies for filling gapes around sensor.